Subcontracted work: what you keep after managing it

A markup on a freelancer's invoice has to pay for the hours you spend briefing and checking their work. Count those hours at your cost rate, and a 30% markup can leave about half of what it looks like.

You hire a freelance developer for US$8,000 and add 30%. The client pays US$10,400, so on paper the job left US$2,400. But you also wrote the brief, answered the developer's questions, reviewed drafts and joined client calls. None of that time is on the freelancer's invoice, and all of it cost you.

This guide shows how to count that time. It shows how many hours a markup can pay for before it reaches zero. It also shows how to set a markup from the per-hour figure you want. A fictional studio works through each step. The formulas work in any spreadsheet.

What the markup has to pay for

The markup is the gap between what the client pays and what the freelancer charges you. Your management time comes out of that gap. What remains is contribution on the job, before overhead.

Markup dollars                   = price − freelancer cost
Management cost                  = management hours × your internal hourly cost
Contribution                     = markup dollars − management cost
Contribution per management hour = contribution ÷ management hours

Contribution here means contribution before overhead: the fee less delivery costs, before rent and other running costs. Client profitability: contribution before overhead explains it client by client.

Markup is a share of the freelancer's cost. Margin is a share of the price. That is why a 30% markup is a 23.1% margin, and markup vs margin covers the conversions.

Three steps to what you keep

Step 1: Log your management hours against the job

Management hours are every hour your team spends on the job, apart from the freelancer's own work:

  • Writing the brief and answering the freelancer's questions.
  • Reviewing drafts and sending feedback.
  • Calls and messages with the client about the freelancer's part.
  • Fixing what comes back, and chasing what's late.
  • Finding and onboarding a freelancer you haven't used before.

Count staff hours and your own. Count client calls too, even if you'd have taken some of them had you delivered the work in-house. The question is what this job leaves, and those hours still cost you.

Leave out the freelancer's hours. Their invoice already holds them, and counting both counts the same cost twice.

Step 2: Cost the hours

Multiply the hours by your internal hourly cost. That is what an hour of your team's time costs you, not what you charge. Use the cost of the person doing the managing. How to set an internal hourly cost rate shows how to work one out, including owner hours.

Step 3: Subtract, then divide

Subtract the management cost from the markup dollars. The result is the job's contribution. If it's negative, the job cost you more than it brought in, before overhead.

Then divide the contribution by the management hours. That is what each hour of your time left after its own cost. Compare it with what an hour of delivery leaves on your in-house work.

A worked example (fictional)

Fictional example. Wrenfield Studio is not a real business. The figures are illustrative and are not a customer result.

Wrenfield Studio is a four-person design and web studio. A retail client wants a store locator and product filters on its website. Wrenfield's freelance developer quotes US$8,000. The studio adds 30% and quotes the client US$10,400. Its internal hourly cost is US$55.

Quote line Amount
Freelancer cost US$8,000
Markup, 30% of US$8,000 US$2,400
Price to the client US$10,400

On the quote, the markup is a 23.1% margin: US$2,400 ÷ US$10,400. The studio then logs 22 management hours:

Management work Hours
Brief and kickoff 4
Reviewing drafts and sending feedback 9
Calls with the client about the build 6
Fixes and chasing 3
Total 22

The arithmetic:

  • Cost of the hours: 22 × US$55 = US$1,210.
  • Contribution: US$10,400 − US$8,000 − US$1,210 = US$1,190.
  • Margin: US$1,190 ÷ US$10,400 = 11.4%.
  • Per management hour: US$1,190 ÷ 22 = US$54.09.

The 23.1% on the quote is 11.4% once the studio's own time is in. The hours used US$1,210 of the US$2,400 markup, or 50.4%. The US$1,190 left is 49.6% of it.

How many hours a markup pays for

A markup covers only so many hours. Divide it by your hourly cost:

Break-even management hours = markup dollars ÷ internal hourly cost

For Wrenfield, US$2,400 ÷ US$55 = 43.6 hours. Past that point, the job costs more than it earns, before overhead. The table shows the same markup at different hours:

Management hours Cost of the hours Contribution Margin Per hour
10 US$550 US$1,850 17.8% US$185.00
22 US$1,210 US$1,190 11.4% US$54.09
35 US$1,925 US$475 4.6% US$13.57
44 US$2,420 −US$20 −0.2% −US$0.45

Margin is contribution ÷ US$10,400. The 22-hour job has 21.6 hours of room before contribution reaches zero. A job that needs 35 hours leaves US$475, and the quote still shows 23.1%.

Small jobs run out of room first. A flat percentage shrinks with the invoice. Management time may not. Take the same 30% on a US$2,000 freelancer. The markup is US$600, which pays for US$600 ÷ US$55 = 10.9 hours. A job that small still needs a brief, a review and a client call. Say it takes 8 hours, or US$440. Contribution is US$600 − US$440 = US$160. That is a 6.2% margin on the US$2,600 price, or US$20.00 an hour.

The invoice is 25% of the size, but the hours are 36.4% of 22. Your own log will show how closely hours follow invoice size. If they follow the number of briefs, rounds and calls instead, a flat markup underprices small jobs.

Set the markup from a per-hour target

To price a job, work backward from what you want each management hour to leave:

Markup dollars = management hours × (internal hourly cost + target per hour)
Markup %       = markup dollars ÷ freelancer cost
Price          = freelancer cost + markup dollars

One reasonable target is what an hour of delivery leaves on your in-house work. Wrenfield's in-house projects leave about US$90 a delivery hour, so its target is US$90. For the store locator:

  • Markup dollars: 22 × (US$55 + US$90) = 22 × US$145 = US$3,190.
  • Markup: US$3,190 ÷ US$8,000 = 39.9%.
  • Price: US$8,000 + US$3,190 = US$11,190.
  • Check: US$11,190 − US$8,000 − US$1,210 = US$1,980, which is 22 × US$90.

Round up to a price you'd quote, US$11,200. That is a 40.0% markup. Contribution is US$11,200 − US$8,000 − US$1,210 = US$1,990, or US$90.45 an hour.

The next table shows the markup needed on the US$8,000 job for other hours and targets. Each cell is hours × (US$55 + target) ÷ US$8,000. The US$0 column covers the management time and nothing more.

Management hours Target US$0 Target US$50 Target US$90
10 6.9% 13.1% 18.1%
22 15.1% 28.9% 39.9%
35 24.1% 45.9% 63.4%

In the 22-hour row, 30% falls between the US$50 and US$90 columns. That matches the US$54.09 found above.

Hours are an estimate when you quote. Take them from your log of similar jobs, and write the number of review rounds into the scope. How to price a project so it still pays shows how.

Log the time against the client, not overhead

Put the freelancer's invoice in the job's outside costs. Put your management hours in its delivery hours, at your own hourly cost. Use one row per client job per month.

If the hours go into overhead, they disappear into a shared pool. Every subcontracted job then looks as if it earned its full markup. The jobs that need the most management look the same as those that need the least.

Two row-level formulas catch most gaps:

Per hour = IF(hours > 0, contribution ÷ hours, "")
Flag     = IF(AND(freelancer cost > 0, hours = 0), "Log management hours", "")

A row with outside costs and no hours has no per-hour figure, and it looks like a clean markup. Treat the blank as a sign that the time wasn't logged. For jobs already delivered, rebuild the hours from your calendar and sent mail: the calls, plus the time you spent on each draft. A rough count beats a blank.

If the hours ran over because the client kept changing the brief, what scope creep and overservicing cost, per client puts a figure on that.

Reading the result

One job rarely settles it. These points help:

  • Compare per hour with your in-house figure. If a management hour leaves less than a delivery hour does, your time earned less here than on your own work. That holds only if you had other work for those hours.
  • Move price first. Raise the markup, or show management as its own line on the quote. Either works if the total covers the hours.
  • Then scope. Fix the number of review rounds, write the brief once and name one contact. Fewer rounds mean fewer hours.
  • Then the freelancer. After a few jobs, compare hours by freelancer. One who needs less checking may be worth a higher invoice.

Don't judge on one job. A first job with a new freelancer may take more hours than the fifth. Log a few jobs before you change a price, and keep first jobs apart from repeat ones.

Common mistakes:

  • Judging the markup by its percentage. 30% sounds healthy. At 35 hours it leaves US$475.
  • Counting only the brief. At Wrenfield it was 4 of the 22 hours.
  • Using one percentage for every job size. The small job above left US$20.00 an hour.

Check how you work with freelancers

Everything above assumes the freelancer is an independent contractor. Whether that is true is a legal question, and your management hours bear on it.

The IRS says to weigh all the evidence of control and independence, in three groups. Behavioral facts ask whether you control, or have the right to control, what the worker does and how they do the job. Financial facts ask who controls the business side: how they are paid, expenses and tools. Relationship facts include written contracts, benefits, and whether the relationship will continue. No single factor decides it. Working remotely doesn't change the test. The IRS page says what matters is whether you have the right to control the details of how the work is done.

So look at what your management hours are made of. Time spent agreeing the result is one thing. Time spent directing how the work is done is another, and it is the kind of control the behavioral group asks about.

The Department of Labor's page says misclassification happens when an employer treats an employee under the Fair Labor Standards Act as an independent contractor. It says that matters because those workers may miss minimum wage, overtime and other protections, and that the employer is responsible for deciding. The IRS page says that treating an employee as a contractor with no reasonable basis can leave you liable for employment taxes for that worker. If it is unclear, the IRS page says you may consider filing Form SS-8, and that a determination can take at least six months. It also says to document each factor you used.

This guide covers US federal pages only. Other rules may apply where you or the freelancer live. Ask an accountant or a lawyer about yours.

What this method doesn't do

  • It stops at contribution before overhead. It isn't net profit. Rent, software and other running costs still come out of what's left.
  • It counts only the hours you log. Unlogged time makes a job look better than it was. Owner hours need logging too.
  • It uses one hourly cost per row. If your most expensive people do the managing, a blended cost understates what the job cost.
  • It doesn't price things going wrong, such as a missed deadline, a rebuild or a credit to the client. They show up only if their hours or costs are logged.
  • It can't tell you what a client will pay. A markup that works on paper still has to win the job.
  • It doesn't show when money moves. You may pay the freelancer before the client pays you.
  • It's management arithmetic, not advice. Ask an accountant how payments to contractors are reported and taxed, and a lawyer about contracts and worker status.

Where the tracker fits

The formulas above work in any spreadsheet. The Client Profitability Tracker takes one row per client project per month. A row holds fees billed, external delivery costs (the freelancer's invoice), delivery hours (your management hours) and your internal hourly cost. It shows contribution before overhead, margin and contribution per delivery hour by client. Each row takes one internal hourly cost, so hours aren't split by person. Entry is manual, and the workbook is tested in Excel 365 for Windows. Like this guide, it stops before overhead.

Before you quote, the Project Quote Calculator prices a project from hours, rates and direct costs.

Independence

Metricvalley is independent. This guide isn't affiliated with, or endorsed by, the Internal Revenue Service or the US Department of Labor. Nothing in this guide is tax, payroll or legal advice.

Sources and method

The figures in the worked example are fictional. The facts about worker classification come from the two pages below.

Common questions

How much should I mark up a freelancer's invoice?

There's no standard figure. Start from the hours you spend managing the job. Multiply them by your internal hourly cost, add what you want each hour to leave, and divide by the freelancer's invoice. In the example, 22 hours at US$55 with a US$90 target needs a 39.9% markup on US$8,000.

Which hours count as management time on subcontracted work?

Every hour your team spends on the job apart from the freelancer's own work: the brief, their questions, reviewing drafts, feedback, client calls about their part, and fixing or chasing what comes back. Leave out the freelancer's hours. Their invoice already includes them.

Should I charge a management fee instead of a higher markup?

Either can work if the total price covers your hours. A separate management line shows the time to you and to the client. A higher markup is quicker to quote. Check the choice against your logged hours after a few jobs.

How we research, check and update these guides. Found an error? Email [email protected] and we’ll correct it and note the change here.

All guides