One client is 40% of revenue: how exposed are you?

Your biggest client's share of revenue is where to start, not the answer. Measure its share of revenue, contribution and hours, then test a year without it. The salaries stay, so you lose the fee, not only the contribution.

Your biggest client is about 40% of what you bill. You know the number. The harder questions are what it means. Does that client pay for your overhead? How much of your team's time does it take? What does a year look like without it?

This guide gives you three shares for the client and a test for the year after it leaves. A fictional studio works through every step. Then it covers what to change without dropping the client.

Three shares, three answers

A share depends on what you divide. Work out three, over the same twelve months:

Revenue share      = client's net fees ÷ all net fees
Contribution share = client's contribution ÷ all contribution
Hours share        = client's delivery hours ÷ all delivery hours

Net fees are what you billed, less credits. Contribution is net fees less delivery costs: outside costs plus delivery hours × your internal hourly cost. It's before overhead. Client profitability: contribution before overhead explains it with a worked month. How to set an internal hourly cost rate shows how to find the rate.

Each share answers a different question:

  • Revenue share: how much of your money in rests on one client.
  • Contribution share: how much of what pays your overhead comes from that client.
  • Hours share: how much of your team's time it uses.

A client that pays less than your average for each delivery hour has an hours share above its revenue share. Its contribution share is usually lower again. That number looks calm. The leave test below shows why it misleads.

How to measure it

Step 1: Pick the period and the fees

Use twelve months, or your last full year. A single month misleads, because one project invoice can swing a share a long way. Use net fees for the period, not cash received.

Count each client once. If a client has three projects, add them. If two companies share an owner who could end both contracts, add those too.

Step 2: Total each client's fees, hours and costs

For each client, add up net fees, outside delivery costs and delivery hours. Then work out:

Cost of hours = delivery hours × internal hourly cost
Contribution  = net fees − outside costs − cost of hours

Total the same columns for all clients together. Take your overhead for the same twelve months from your accounts: rent, software, insurance, admin and anything else outside delivery. If your internal hourly cost already covers salaries, leave salaries out of overhead, or you count them twice.

Step 3: Work out the three shares

Divide the client's three totals by the all-client totals. Round only at the end. Write each share down with its period, so next quarter's figures compare like for like.

Step 4: Test a year without the client

Shares describe today. The leave test describes the day after the client leaves. Start from the year's result, then take away what the client paid:

Result now            = contribution − overhead
Result without client = result now − client's net fees + cost that stops

"Cost that stops" is only what you could stop paying: a contractor who works on that account, or a tool you'd cancel. Salaries for staff you keep don't stop. Result now is what the year left after overhead, before tax. This is the avoidable-cost idea from managerial accounting. When you drop a segment, only costs that would no longer exist count, and some fixed costs continue.

Three more figures put the loss in terms you can act on:

Overhead cover      = other clients' contribution ÷ overhead
Hours to break even = shortfall below zero ÷ fee per resold hour
Hours to get back   = (result now − result without client) ÷ fee per resold hour

Overhead cover under 100% means your other clients can't pay your overhead, even if every delivery cost of that client stopped. A resold hour earns its whole fee, because you already pay for the hour. If the new work needs outside costs, take them off the fee per hour.

A worked example (fictional)

Fictional example. Alderbank Studio is not a real business. The figures are illustrative and are not a customer result.

Alderbank is a six-person design and web studio that bills in US dollars. Its largest client is Haldane Hotels. Over the last twelve months the studio logged 6,600 delivery hours at one internal cost of US$60 an hour. It paid no outside costs. Overhead was US$150,000.

  • Haldane Hotels: US$240,000 in net fees for 3,000 hours.
  • All other clients: US$360,000 in net fees for 3,600 hours.

The year, by client:

Client Net fees Hours Cost of hours Contribution Margin Per hour
Haldane Hotels US$240,000 3,000 US$180,000 US$60,000 25.0% US$20.00
All other clients US$360,000 3,600 US$216,000 US$144,000 40.0% US$40.00
Total US$600,000 6,600 US$396,000 US$204,000 34.0% US$30.91

The arithmetic for Haldane:

  • Cost of hours: 3,000 × US$60 = US$180,000.
  • Contribution: US$240,000 − US$0 − US$180,000 = US$60,000.
  • Margin: US$60,000 ÷ US$240,000 = 25.0%.
  • Contribution per hour: US$60,000 ÷ 3,000 = US$20.00.

The total checks both ways. US$60,000 + US$144,000 = US$204,000. From the totals, US$600,000 − US$0 − US$396,000 = US$204,000. After overhead, the result now is US$204,000 − US$150,000 = US$54,000.

The three shares. Each is Haldane's figure ÷ the all-client figure:

Measure Haldane All clients Share
Net fees US$240,000 US$600,000 40.0%
Contribution US$60,000 US$204,000 29.4%
Delivery hours 3,000 6,600 45.5%

That is US$240,000 ÷ US$600,000 = 40.0%, US$60,000 ÷ US$204,000 = 29.4%, and 3,000 ÷ 6,600 = 45.5%.

Haldane is 40.0% of fees and 45.5% of hours. It pays US$80.00 for each delivery hour (US$240,000 ÷ 3,000). The other clients pay US$100.00 (US$360,000 ÷ 3,600). That gap is why its contribution share is only 29.4%.

A year without Haldane. Haldane gives notice, and the team stays. How much of Haldane's US$180,000 in staff time can Alderbank stop paying for? That decides the result, so here are three cases:

Cost that stops Result without Haldane
US$0 −US$186,000
US$90,000 −US$96,000
US$180,000 −US$6,000

For the first row: US$54,000 − US$240,000 + US$0 = −US$186,000. Each US$90,000 of cost that stops adds US$90,000 to the result.

The first row fits a studio with salaried staff. There the gap is the whole fee. US$240,000 is 4.0 times Haldane's US$60,000 contribution (US$240,000 ÷ US$60,000). The last row is the best case. Even then, the other clients' US$144,000 covers 96.0% of the US$150,000 overhead (US$144,000 ÷ US$150,000). The year ends at −US$6,000.

Hours to resell. With the team staying, 3,000 hours sit free. Each resold hour brings its full fee, because the hour is already paid for. At the US$100.00 an hour the other clients pay:

  • To break even: US$186,000 ÷ US$100.00 = 1,860 hours, or 62.0% of the 3,000 free hours.
  • To get back to US$54,000: US$240,000 ÷ US$100.00 = 2,400 hours, or 80.0% of them.

New work at Haldane's own US$80.00 an hour needs US$240,000 ÷ US$80.00 = 3,000 hours. That is every free hour.

What the result says

  • The contribution share understates the exposure. At 29.4%, Haldane looks like a client you could absorb losing. With the team staying, the loss is 4.0 times its contribution.
  • The hours share shows the job ahead. Replacing Haldane means finding work for 45.5% of the team's time.
  • One year can mislead. A client that started part-way through the year looks smaller than it is. Use its current monthly fee × 12 against your other clients' last twelve months.

Is 40% too much?

No source we found gives a safe share. Advice pages do set lines. One advisory firm says buyers discount an agency when one client passes 20% of revenue. A newsletter says no client should pass 20%, with stronger warnings at 25% and 40%. Neither gives data behind its numbers. US securities rules list "dependence on one or a few major customers" among the things a smaller public company describes when it matters to understanding the business. That item sets no percentage.

So set your own line with three questions:

  1. Does the year end below zero without the client? Use the case that fits your costs, and note how far below.
  2. Is overhead cover under 100%? If so, your other clients can't carry the overhead alone.
  3. Could you sell the hours in time? Compare the hours to break even with the hours of new work you usually sell in a quarter, and with how many months your cash lasts. The 20-minute cash runway check shows how to count those months.

Alderbank answers yes to the first two. The third depends on how fast it can sell 1,860 hours. A smaller share might pass all three. Your own numbers decide.

Lower the exposure without dropping the client

Four levers, with Alderbank's numbers:

  • Notice and term. Each month of notice is worth a month of fees: US$20,000 at Haldane (US$240,000 ÷ 12). A 90-day notice period gives US$60,000 and three months to resell hours. Contract terms are for you and the client to agree. Ask a lawyer before you change them.
  • Cost you can flex. The more of Haldane's US$180,000 in staff time you can stop paying for, the smaller the gap. Contractors on short notice and part-time cover can flex. Salaries usually can't, at least not quickly.
  • Price. Haldane pays US$80.00 an hour against US$100.00 from the others. At US$100.00 its fee would be 3,000 × US$100.00 = US$300,000, which is US$60,000 (25.0%) more. Its share of revenue would also rise to 45.5% (US$300,000 ÷ US$660,000). A higher price improves what the client leaves, not the dependence. When to reprice, rescope or drop a client shows how to raise a fee with numbers.
  • Pipeline. The share falls when other clients grow. To bring Haldane to 30% of revenue at the same fee, the others would need US$240,000 ÷ 0.30 − US$240,000 = US$560,000. That is US$200,000 more, or 55.6% growth on US$360,000. At US$100.00 an hour, it means 2,000 more hours to sell and deliver. The 30% only shows the arithmetic. It isn't a target we recommend.

Growth dilutes the share over months or years. Notice and flexible cost work on the day the client leaves.

What this method doesn't do

  • It uses one blended internal hourly cost. If a client uses your most expensive people, its contribution is lower than the blended rate shows.
  • "Cost that stops" is a number you type. Whether you can end a contractor's work, cut hours or let someone go depends on your agreements and local employment law. Ask a lawyer or employment adviser.
  • It looks back twelve months. It can't say whether a client will renew.
  • It assumes every free hour can be sold at one price. Selling takes time, and new work may pay less.
  • It gives a yearly result, not cash. When money arrives, and how many months your cash lasts, is a separate check.
  • It counts money and hours only. A client's referrals and reputation are not in the figures.
  • It's management arithmetic, not your accounts. For how concentrations appear in financial statements, or for any tax question, ask your accountant.

Where the tracker fits

The Client Profitability Tracker records fees, credits, delivery hours and costs for each client project by month. It calculates contribution before overhead, margin and contribution per delivery hour for each client, in the currency you report in. That gives you each client's fees, contribution and hours for the shares. Take the months you want and add them. It stops before overhead, so type your overhead beside it for the leave test. It does no cash flow.

The Cash & Runway Planner covers the cash side. It shows your largest client's share of the year's money in, and the months your cash covers if a client leaves. It's a cash plan in one currency per file, not accounting.

Entry is manual in both, and both workbooks are tested in Excel 365 desktop. The formulas above work in any spreadsheet.

Independence

Metricvalley is independent. This guide isn't affiliated with, or endorsed by, the U.S. Securities and Exchange Commission. Nothing in this guide is financial, tax or legal advice.

Sources and method

Every figure in the worked example is fictional (Alderbank Studio). The three shares apply the contribution-margin idea to each client's fees, hours and costs. The leave test applies the avoidable-cost idea from the OpenStax text below. The 20%, 25% and 40% lines are quoted from the two advice pages, which give no data for them. The securities rule is quoted from the regulation as the reference site prints it.

Common questions

How do you work out your biggest client's share of revenue?

Divide that client's net fees for the last twelve months by net fees from all clients. Use net fees, which is what you billed less credits, not cash received. Add all of one client's projects together. Then do the same with contribution and with delivery hours, because the three shares answer different questions.

If your biggest client leaves, do you lose the fee or only the contribution?

You lose the fee, less any delivery cost that stops with the client. Salaries for staff you keep don't stop, so the loss is usually close to the whole fee. Contribution is the best case, when all of the client's delivery cost stops. Work out both before you decide how exposed you are.

Is there a safe percentage for one client?

We found no source that gives one. Advice pages quote 20% as a line, with stronger warnings at 25% and 40%, and show no data for it. Test your own numbers instead. Does the year end below zero without the client? Is overhead cover under 100%? Could you resell the hours in time?

How we research, check and update these guides. Found an error? Email [email protected] and we’ll correct it and note the change here.

All guides